Buyer Bot
Objective
Check if the price of pDAI or pUSDC is below AFFECTION™
Buy if the price has a percent difference within amount specified
Send purchased tokens to Minter Bot
Instructions
Deposit 100k-300k PLS before running
You can play with the amounts/settings after
Run it by typing into terminal:
python bot-buyer.pyStop the bot by pressing
CTRL + C
You can right click the PyCharm terminal to open a menu and select "Split Right". This will let you watch all 3 bots on one screen.
Python Code
from core import *
# set config variables
buy_percent_diff_pdai = 20
buy_percent_diff_pusdc = 30
buy_with_amount_pls = 30000
slippage_percent = 5
wallet_a_min_pls = 20000
wallet_b_min_pls = 100000
loop_delay = 3
rapid_gas_fee_limit = 650000
# load wallet A and set address for logging
set_logging(wallet_a_address, 'INFO')
account = load_wallet(wallet_a_address, os.getenv('SECRET'))
# load contract addresses
pdai_address = '0x6B175474E89094C44Da98b954EedeAC495271d0F'
pusdc_address = '0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48'
affection_address = '0x24F0154C1dCe548AdF15da2098Fdd8B8A3B8151D'
wpls_address = '0xA1077a294dDE1B09bB078844df40758a5D0f9a27'
while True:
# log the wallet's pls balance
pls_balance_a = get_pls_balance(account.address)
logging.info("PLS Balance: {:.15f}".format(pls_balance_a))
# check if wallet b has a minimum amount of pls and send some back for minting
pls_balance_b = get_pls_balance(wallet_b_address)
if pls_balance_b - wallet_b_min_pls < 0:
send_to_wallet_b = math.ceil(wallet_b_min_pls - pls_balance_b)
logging.info("Minter needs {} PLS".format(send_to_wallet_b))
# check if sending pls to wallet b leaves wallet a with enough left over
if send_to_wallet_b < (pls_balance_a - wallet_a_min_pls):
if send_pls(account, wallet_b_address, send_to_wallet_b):
logging.info("Sent {} PLS to {}".format(send_to_wallet_b, wallet_b_address))
else:
logging.warning("Failed to send {} PLS to {}".format(send_to_wallet_b, wallet_b_address))
else:
logging.info("Not enough PLS to send right now")
# check the current gas price
if get_beacon_gas_prices('rapid', beacon_gasnow_cache_seconds) > rapid_gas_fee_limit:
logging.warning("Gas fees are too high")
log_end_loop(loop_delay)
continue
# take samples of 1 pdai/pusdc/affection to wpls price
pdai_sample_result = sample_exchange_rate('PulseX_v2', pdai_address, wpls_address)
pusdc_sample_result = sample_exchange_rate('PulseX_v2', pusdc_address, wpls_address)
affection_sample_result = sample_exchange_rate('PulseX_v2', affection_address, wpls_address)
if not pdai_sample_result or not pusdc_sample_result or not affection_sample_result:
logging.warning("Failed to sample prices")
log_end_loop(loop_delay)
continue
# log the current rate
logging.info("pDAI Rate: 1 = {} PLS".format(pdai_sample_result / 10 ** 18))
logging.info("pUSDC Rate: 1 = {} PLS".format(pusdc_sample_result / 10 ** 18))
logging.info("AFFECTION™ Rate: 1 = {} PLS".format(affection_sample_result / 10 ** 18))
# keep a minimum pls balance in the bot
skip = False
if (pls_balance := get_pls_balance(wallet_a_address)) < wallet_a_min_pls:
logging.warning("PLS balance is below minimum")
skip = True
elif pls_balance < buy_with_amount_pls + wallet_a_min_pls:
logging.warning("Buying would put the PLS balance below minimum")
skip = True
if skip:
log_end_loop(loop_delay)
continue
# check if the pdai price is cheaper than affection price
if pdai_sample_result < affection_sample_result:
percent_diff = ((pdai_sample_result - affection_sample_result) / affection_sample_result) * 100
# pdai price must be cheaper and over the diff threshold
if percent_diff < 0 and abs(percent_diff) >= buy_percent_diff_pdai:
logging.info("Buying pDAI...")
# get the estimated amounts returned for the swap
estimated_swap_result = estimate_swap_result(
'PulseX_v2',
wpls_address,
pdai_address,
buy_with_amount_pls
)
if estimated_swap_result:
# broadcast swap pls for pdai
if swap_tokens(
account,
'PulseX_v2',
[wpls_address, pdai_address],
estimated_swap_result,
slippage_percent,
wallet_b_address
):
logging.info("Swapped {} PLS to pDAI".format(buy_with_amount_pls))
else:
logging.warning("No estimated swap result data")
else:
logging.info("pDAI is not within range to buy yet ({}%)".format(buy_percent_diff_pdai))
else:
logging.info("pDAI is not cheaper than AFFECTION™ yet")
# check if the pusdc price is cheaper than affection price
if pusdc_sample_result < affection_sample_result:
# check the percent difference
percent_diff = ((pusdc_sample_result - affection_sample_result) / affection_sample_result) * 100
# pusdc price must be cheaper and over the diff threshold
if percent_diff < 0 and abs(percent_diff) >= buy_percent_diff_pusdc:
logging.info("Buying pUSDC...")
# get the estimated amounts returned for the swap
estimated_swap_result = estimate_swap_result(
'PulseX_v2',
wpls_address,
pusdc_address,
buy_with_amount_pls
)
if estimated_swap_result:
# broadcast swap pls for pusdc
if swap_tokens(
account,
'PulseX_v2',
[wpls_address, pusdc_address],
estimated_swap_result,
slippage_percent,
wallet_b_address
):
logging.info("Swapped {} PLS to pUSDC".format(buy_with_amount_pls))
else:
logging.warning("No estimated swap result data")
else:
logging.info("pUSDC is not within range to buy yet ({}%)".format(buy_percent_diff_pusdc))
else:
logging.info("pUSDC is not cheaper than AFFECTION™ yet")
# wait before next loop
log_end_loop(loop_delay)
Source
Last updated